SFA Sanicompact

            Check                           SFA SANICOMPACT


Half-bathroom Self Contained 2pcs bathroom - 1/3Hp -  Install Anywhere macerating ventless toilet system

Applications
  • For half-bathroom applications
  • Discharge ↑ 9 Ft ↑ and/or ← 120 Ft →
  • Toilet with built-in macerating system
  • Water saving dual-flush system

The Sanicompact is a self-contained dual-flush toilet system used to install a half-bathroom up to 9 feet below the sewer line, or even up to 120 feet away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.

Description and details of the products.

The Sanicompact is a combination of a vitreous china toilet bowl and macerator/pump built into one compact unit.  This modern shaped self-contained china toilet is especially designed with several ideas in mind:

  • For situations where there is not enough space.
  • As a toilet that uses a minimum amount of water.
  • As a toilet for use with people that have physical limitations.

The Sanicompact needs no gravity flow tank as the flushing action and macerating pump cycle is automatic after pressing a push button on top of the bowl.  The flushing mechanism is electrically timed to allow water to pass through the toilet.

By pressing the push button, this activates a timer and a solenoid valve in order to fill and wash the sides of the bowl.  The motor starts and the waste and paper are sucked inside where it is macerated and pumped away.  The motor stops after approximately 10-15 seconds and the timer programs the refill of the bowl with fresh water.

The standard dual flush version uses 1.28 gpf (4.8 lpf) and 1 gpf (3.8 lpf).  To choose either option, the unit is provided with a dual push button.  This option allows using less water than any regular toilet but with the same efficiency.

The inside of the Sanicompact comprises of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the blade and the pump.  The motor is sealed for life in an oil filled enclosure.  A common spindle/shaft drives the impeller and the macerator blades.  The moving parts therefore are kept to an absolute minimum.  Water and organic waste matter, enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM.  The reduced solids are picked up and the impeller mounted beneath the motor ejects the waste.  The unit pumps the effluent upward to 9 feet and/or 120 feet horizontally (with gravity fall).

The discharge elbow on the back of the Sanicompact can be rotated 360 degrees to fit any type of installation required.  A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit. 

The Sani compact will also discharge gray water from a sink.  The wastewater drains into a 1 1/4" hose connection in back of the toilet.  The system turns on automatically once water is drained through a sink.

The Sanicompact is a forced main and does not need to vented and connected to a vent stack.  Other fixtures may need to be vented as per local plumbing codes.

It is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter (GFI) circuit.

The Sanicompact has been certified to American and Canadian Standards.  Macerating standard; US: CSA Certified - ASME A112.3.4, CA: Macerating Standard CSA B45.9.

Check 

Technical features of Sanicompact
Part number023
Max. horizontal discharge9 ft
Max. vertical discharge120 ft
Voltage120 V
Frequency60 Hz
Amperage7.2 Amps (Max)
Motor0.5 HP oil-filled thermally protected motor
Capacitor rating45 microfarad
Operating temperature95°F (110°F Max.)
Power cord length59 inches
Noise level (measured at 3 ft.)≤ 53 dBA (Lp)
Discharge pipe diameter1"
Discharge rate at 15 ft@9 Ft : 24 GPM
Discharge rate at 3 ft31 GPM
Normal running time24 sec (18 sec ECO mode)
Capacity0.8 gallons / 0.3 liters
Inlets diameters1–1/4” sink connection (on motor case)
Type of activationPush button / circuit board
Weight64 lbs / 29 kg (Bowl with motor)
Certifying agenciesCSA (IPC, NSPC)

Check 



For more details please check the below link

https://youtu.be/Dy-w-7arPkM

https://youtu.be/9Q3mxxIfb-w


for more detaiils please contact

Nilesh Deshmukh -

mugdha.nilesh75@gmail.com

mob no.9322718929

if you like this Blog please comment and share the link to you friends and business community


Comments

Post a Comment

Popular posts from this blog

SFA SANIALARM

Image
Check  SFA SANIALARM Check u The Sanialarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound until it is switched off or the problem is rectified. u The Sanialarm is battery operated and can be installed on most models* in the Saniflo range, including Saniplus and Sanivite pumps.  It has been designed to be installed on new or existing Saniflo installations as it is quickly fitted onto the lid of the Saniflo unit. u * Suitable for use with Saniplus, Sanipro, Sanibest Pro, Sanigrind Pro, Sanipack and Sanivite Check   Installaton Check The 18" extension pipe was designed with the idea to simplify the installation process making it easier to hide the pump and plumbing behind the wall. It has an inner gasket which connects to the rear spigot of the Saniflo toilet creating a sealed connection. The diameter of the extension pipe is 4"...
Read more

SFA SANIPACK

Image
                                                                                       Check SFA SANIPACK (SRSTD) Check Benefits of Sfa Sanipack  Here are some potential benefits associated with Saniflo systems: 1.Flexibility of installation: Saniflo systems allow you to install additional bathroom fixtures, such as toilets, sinks, showers, or bathtubs, virtually anywhere within your home or commercial space. They can be installed below the sewer line, allowing for greater flexibility and convenience in terms of plumbing layout. 2.Cost-effective solution: Saniflo systems can often be a cost-effective alternative to extensive plumbing renovations. Since they eliminate the need for costly and disruptive excavation work, you can ...
Read more

SFA SANITOP (SRSTD)

Image
Check Check Sanitop macerator pump, manufactured by SFA (Société Française d'Assainissement), is designed to macerate and pump wastewater from domestic sanitary fixtures such as toilets, sinks, showers, and bathtubs. Here are some potential benefits of using an SFA Sanitop macerator pump: Versatility: The Sanitop macerator pump allows you to install bathroom fixtures, such as a toilet or a shower, in unconventional locations where traditional plumbing connections might not be feasible. It can be particularly useful in basements, attics, garages, or other areas below the main sewer line. Easy installation: Installing a Sanitop macerator pump is generally easier and less expensive compared to traditional plumbing systems. It doesn't require extensive excavation or major modifications to the existing plumbing infrastructure. This can save time, effort, and costs during installation. Efficient wastewater disposal: The maceration process of the Sanitop pump effectively breaks down s...
Read more