SFA SANIALARM

Check SFA SANIALARM



u The Sanialarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound until it is switched off or the problem is rectified.

u The Sanialarm is battery operated and can be installed on most models* in the Saniflo range, including Saniplus and Sanivite pumps.  It has been designed to be installed on new or existing Saniflo installations as it is quickly fitted onto the lid of the Saniflo unit.

u * Suitable for use with Saniplus, Sanipro, Sanibest Pro, Sanigrind Pro, Sanipack and Sanivite

Check 


Installaton
Check

The 18" extension pipe was designed with the idea to simplify the installation process making it easier to hide the pump and plumbing behind the wall. It has an inner gasket which connects to the rear spigot of the Saniflo toilet creating a sealed connection. The diameter of the extension pipe is 4" (5" bell housing). It comes with a paintable decorative trim that surrounds the pipe and provides a perfect finish. * Suitable to be used with the Saniaccess3, Saniplus, Sanibest Pro and Saniaccess2 systems.

Check

The Sanialarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound until it is switched off or the problem is rectified. The Sanialarm is battery operated and can be installed on most Saniflo macerating units and drain water pumps. * Suitable for use with Saniplus, Sanibest Pro, Sanipack, Sanigrind Pro and Sanivite.





Comments

Popular posts from this blog

SFA SANIPACK

SFA SANITOP (SRSTD)